Stainless Materials: drill deeper, mill faster17-Jan-2018 MIKRON TOOL SA AGNO
The small drill CrazyDrill Cool SST-Inox, available in the diameter range of 1 to 6 mm, is especially suitable to drill without pecking. In fact, merely one feed stroke is necessary to reach the full depth of 20 x d. This is made possible by the tool integrated helicoidally, drop shaped coolant ducts, which deliver a massive and constant coolant flow during the entire drilling operation. These ducts provide up to quadruple coolant flow. The advantage of this efficient cooling method is the prevention of overheating the cutting edges right from the beginning. Combined with the right geometry this cooling method facilitates an easier breaking of chips which in turn helps to flush them out of the flutes. These factors afford machining with higher cutting parameters (cutting speed and feed).
Furthermore, a new geometry with a chip-breaking effect in the front section of the flutes and an open flute profile in the back provide for a perfect evacuation of the micro-chips. The coating is also new and specially adapted to machine stainless materials.
CrazyMill Cool Ball Z4: The range of the milling cutters CrazyMill Cool is being expanded with a four blade VHM finishing mill in the diameter range of 1 to 8 mm for depths up to 5 x d. Same as the two-blade version, coolant ducts integrated in the shaft provide a massive flow of coolant. This prevents overheating of the cutting edges and facilitates easy flushing of chips from the machining area. A surface finish close to grinding quality is thus achieved. Especially for the medical technology (implants) milling head lengths of up to 4.5 x d are available. With the progressive flutes (from 30º to 40º) vibration free milling, which improves the surface quality even more, is guaranteed. Due to this geometry, it is possible to use the tool on the whole cutting length from the radius to the cylindrical part.